|
|
Exhibition hall steel structure
Selyvonenko, Ivan ; Pilgr, Milan (referee) ; Brosch, Petr (advisor)
The subject of the diploma thesis is the design and structural analysis of an exhibition hall. The building is located in Brno city. The dimensions of a floor plan are 121,8 m x 66,5 m, the height is 17,75 m. The load-bearing structure consists of arched truss girders, which are pin-supported by fixed columns. The distance between main trusses is 8,7 m. The supporting part of the roof deck consists of solid-purlins. Spatial rigidity of the structure is ensured by cross bracing and longitudinal bracing. All structural members are made of rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. This thesis consists of structural design report of main load bearing elements including connections design and drawings.
|
|
|
Multi - Purpose Sports Hall
Baudišová, Monika ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.
|
|
|
The steel roof structure of a tennis hall
Šašinka, Jakub ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
This bachelor thesis describes the design and assessment of steel structure of the roofing of the sports hall. The supporting structure of hall is 20.00 meters span, 39.80 m length and 11.99 m height. Main construction material is steel, grade S235. There were done 3 possible variants of the hall, from which one of them was calculated in detail. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes.
|
|
|
Steel structure of a military museum
Šašinka, Jakub ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The diploma thesis describes the design and assessment of steel structure of the roofing of the military museum in Králíky. The supporting structure of hall is 40.00 meters span. The total layout are 55.93 x 72.04 m, building height 11.43 m, 16.11 m pylon height. Main construction material is steel, grade S355, secondary constructions are made from steel grade S235, rods are made from steel grade S460. I did optimization of steel structure and chose the best option. For this option I made detailed structural analysis. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes which hang on rods on a sloped pylon. Part of the report is open-air roofing.
|
|
|
Industrial building
Kočí, Petr ; Buchta, Stanislav (referee) ; Sýkora, Karel (advisor)
Bachelor thesis deals with proposal of a load-bearing steel structure of a single-bay hall in accordance with the space arrangement of the building with span of 24 m, length of 63 m and 8,7 m height of a modular crane cantilever. Two bridge cranes are designed with a load capacity of 12,5t and 32/8 t. Essential load-bearing element of the building are transversal frames designed in 12m distance formed by truss girder and solid columns cantilevered at the plane of a transversal main frame. Roof panels are fixed onto the parabolic purlins. Hall is located in the Ustí nad Labem region.
|
|
|
Steel structure of a business centre
Kočí, Petr ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The diploma thesis elaborates on the proposal of a loadbearing steel structure of a shopping centre. Four-storey building has total lenght of 88 m, width 48 m and its base structural grid is 8 x 8 m. The total height of building is 25,4 m. First three floors above ground are designed with structural height of 5,6 m whilst the 4TH floor uses height of 4,0 m. Frame structure is formed by primary beams and castellated secondary beams. Above 4TH floor, the roof structure is designed in two alternative versions, both using solid purlins and truss girder. The 3D computer animation of the building is also part of thesis. The shopping centre that is subject of the final thesis is located in Brno area.
|
|
|
Truss arch structure for multi-purpose hall
Chalupa, Vojtěch ; Hron, Lukáš (referee) ; Röder, Václav (advisor)
The main objective of this bachelor’s thesis is a design of a multipurpose mobile arc hall. The arc span is 25 m. Total hall lenght is 30 m. The load-carrying construction system consists of a transversal truss beams composed of tube profiles. The variant of transversal truss beams as Vierendeel beams is further designed in this thesis. Transversal beams are supported by joint bearings. The calculation was done in the Scia Engineer 2011 software.
|
|
|
Steel load-bearing structure of a sport hall
Cejpek, Martin ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The main target is to design and assess the steel structure of a tennis hall. The steel structure is rectangular shaped, single-nave, with a 24 m span and 48 m length (without hanging gable walls). An analysis of two solutions of the supporting structure was performed. The first variant is a pin-supported truss girder connected to columns fixed in the transverse direction and an alternative is a frame construction. Both variants were compared and the amount of steel was found. The selected option was developed in greater detail.
|
|
|
Ice Hockey stadium
Chalupa, Vojtěch ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The aim of this diploma thesis is the design of the roofing of an ice hockey stadium situated in Žďár nad Sázavou. Plan view dimensions are 55 m x 77 m. The structural height of the roof varies from 10 to 17 m. The roof itself consists of pipe truss girders with a span of 55 m, which are supported by columns on each side. The girders are suspended by a load-carrying arch with a span of 96 m and a camber of 29 m through a system of pre-stressed cables. To determine the internal forces, structural analysis software Scia Engineer was used. Individual elements were then manually designed.
|
|
|
Steel structure of an industrial building
Kopecký, Ladislav ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
Industrial hall with storage outbuilding. The length of the hall is 72 meters and width of 30 meters. The main hall has a span 24 meters and the outbuilding has a span 6m. The distance between primary steel frame is 6 meters. The height of the main hall is 10.7 meters and a height of outbuilding is 13.0 metres. The roof is flat with roof slope of 3.5% the main hall and 8.75% outbuilding. The structural system of the hall's bar structure. Primary steel frame is designed as a steel frame rafter with eaves haunch. In the roof structure are designed purlins. The stability of the structure is secured by roof braces and longitudinal braces. The hall is pin-supported on the foundation pad. The hall is clad wall and roof panels PUR. Main hall is equipped with a bridge crane with capacity of 8 tons.
|
guest ::
